About Us

AXVAC COMPOSITE was founded in 2017. The company was from the start located in Maribo.

The company was in the beginning a part of KSV A/S. The founder and owner Kenneth Sorensen, sadly passed away – far too soon. Co-owner Lars Leman therefore took over the ownership and responsibility for the company in June 2019. The Company then moved to new address in the “Old Milling house” in north Zealand.

The past years AXVAC have been focusing on development and sale of hotmelt adhesives -for the Composite industry – worldwide. Since the demand continuously increases for new and healthier solutions / technology to insure safer and healthier work environment – we feel a growing interest and demand for our solvent free hotmelt adhesives.

Said in all modesty – AXVAC have over the past years gained knowledge and expertise which enables us to describe ourselves as hotmelt adhesives experts.

Mission

AXVAC will continuously do our very best to spread the knowledge about the sensible alternative to solvent based spray adhesives. We will make sure as many as possible will have the opportunity to gain knowledge and practical experience with our products.

It is our goal to make our hotmelt adhesives to the composite industry´s preferred adhesives solution.

Vision

AXVAC will be innovative, openminded and foresight. We will continuously focus on development.

We want to take responsibility and take the lead in creating a safer and healthier working environment in the composite industry.

Scroll til toppen

Light Brown Hotmelt Adhesive

Specially formulated for use in vacuum infusion processes for composite production

The vac tac 100® hotmelt spray system is used for positioning reinforcement materials and peel ply layers in the mold prior to resin infusion. It is suitable for positioning glass mat, balsa and foams within the composite structure. The vac tac 100® hotmelt glue system is custom made for the construction of yachts and wind turbine blades. This versatile, safe and solvent-free hot melt technology delivers higher levels of tack than is possible with traditional aerosol cans. Once applied, it remains tacky for up to 4 minutes so that core materials can be positioned and adjusted – giving the user more time and flexibility to work. The high levels of tack reduce the amount of adhesive required. This minimizes both the cost, and the risk of impacting the composite structure.

Vac tac 100® hot melt spray adhesives have been specially formulated for use with vacuum infused composites, to position and secure reinforcement fabrics, foams, balsa, peel plies and release films during lay-up – even in the largest vacuum infused composite structures. They only need to be applied to one surface using vac tac 100® spray tools, where, for up to 4 minutes, they provide an instant, very high ‘grab’ adhesive surface. Once attached, the materials can still be easily repositioned if required – offering more working time and flexibility for the user. Only once they have been firmly pushed together is the final adhesive bond made. Unlike VOC (volatile organic compound) spray adhesives, vac tac 100® has an unlimited shelf life and does not require any special packaging, transportation, or storage. When applied correctly, vac tac 100® has none of the health and contamination problems normally associated with airborne particles produced by other adhesives, and is 100 % solvent- and water-free.

Specially formulated for use in vacuum infusion processes for composite production

The vac tac 100® system contributes to fast, efficient, non -hazardous  work environment that saves time and money.

Light Brown Hotmelt Adhesive

Specially formulated for use in vacuum infusion processes for composite production

The vactac 300® hotmelt spray system is used for positioning reinforcement materials and peel ply layers in the mold prior to resin infusion. It is suitable for positioning glass mat, balsa and foams within the composite structure. The vactac 300® hotmelt glue system is custom made for the construction of yachts and wind turbine blades. This versatile, safe and solvent-free hot melt technology delivers higher levels of tack than is possible with traditional aerosol cans. Once applied, it remains tacky for up to 4 minutes so that core materials can be positioned and adjusted – giving the user more time and flexibility to work. The high levels of tack reduce the amount of adhesive required. This minimizes both the cost, and the risk of impacting the composite structure.

Vactac 300® hot melt spray adhesives have been specially formulated for use with vacuum infused composites, to position and secure reinforcement fabrics, foams, balsa, peel plies and release films during lay-up – even in the largest vacuum infused composite structures. They only need to be applied to one surface using vactac 300® spray tools, where, for up to 4 minutes, they provide an instant, very high ‘grab’ adhesive surface. Once attached, the materials can still be easily repositioned if required – offering more working time and flexibility for the user. Only once they have been firmly pushed together is the final adhesive bond made. Unlike VOC (volatile organic compound) spray adhesives, vactac 300® has an unlimited shelf life and does not require any special packaging, transportation, or storage. When applied correctly, vactac 300® has none of the health and contamination problems normally associated with airborne particles produced by other adhesives, and is 100 % solvent- and water-free.

Specially formulated for use in vacuum infusion processes for composite production

The vactac 300® system contributes to fast, efficient, non -hazardous  work environment that saves time and money.

Light Brown Hotmelt Adhesive

Specially formulated for use in vacuum infusion processes for composite production

The vactac 300® hotmelt spray system is used for positioning reinforcement materials and peel ply layers in the mold prior to resin infusion. It is suitable for positioning glass mat, balsa and foams within the composite structure. The vactac 300® hotmelt glue system is custom made for the construction of yachts and wind turbine blades. This versatile, safe and solvent-free hot melt technology delivers higher levels of tack than is possible with traditional aerosol cans. Once applied, it remains tacky for up to 4 minutes so that core materials can be positioned and adjusted – giving the user more time and flexibility to work. The high levels of tack reduce the amount of adhesive required. This minimizes both the cost, and the risk of impacting the composite structure.

Vactac 300® hot melt spray adhesives have been specially formulated for use with vacuum infused composites, to position and secure reinforcement fabrics, foams, balsa, peel plies and release films during lay-up – even in the largest vacuum infused composite structures. They only need to be applied to one surface using vactac 300® spray tools, where, for up to 4 minutes, they provide an instant, very high ‘grab’ adhesive surface. Once attached, the materials can still be easily repositioned if required – offering more working time and flexibility for the user. Only once they have been firmly pushed together is the final adhesive bond made. Unlike VOC (volatile organic compound) spray adhesives, vactac 300® has an unlimited shelf life and does not require any special packaging, transportation, or storage. When applied correctly, vactac 300® has none of the health and contamination problems normally associated with airborne particles produced by other adhesives, and is 100 % solvent- and water-free.

Specially formulated for use in vacuum infusion processes for composite production

The vactac 300® system contributes to fast, efficient, non -hazardous  work environment that saves time and money.

Vi bruger cookies for at kunne give dig den bedste oplevelse. Ved at bruge vores side accepterer du brugen af cookies.